Install car alarm

You could opt to have the system connected to your battery by a professional, as you would with a typical car alarm. This has the benefit of keeping any wires out of the way and hidden. Other options are quite easy to install yourself. One of the most popular is the OBD device. This will simply plug right into the OBD port on your vehicle.

Once you have it plugged into the vehicle, you can set up the CarLock app and connect the two. You will then receive the alerts to your phone, just as you would if you had someone install it by hardwiring it to the battery. You do not have to worry about the device taking up too much of your battery power whether it is hardwired or connected to the OBD port. Additionally, the app allows you to monitor your battery. Additionally, there is an option for a wireless version. This is powered by a battery inside of the device.

One of the nice benefits of a wireless option is that you can place it just about anywhere in your vehicle and it will still work. As you can see, traditional car alarms alone are not enough to keep your vehicle entirely safe. There's nothing worse than having to drive your vehicle to the auto parts store with the inside half ripped apart. It can sometimes be difficult to know where to start when removing the paneling, and breaking off plastic fasteners is inconvenient when you try to unsuccessfully put them back on.

The best technique, if you have never removed a panel before, is to follow the instructions by the book. Pick up a set of automotive plastic trim puller tools that make the job a whole lot easier, and they also help you avoid damaging the trim on your vehicle because they are made of plastic.

You're going to have to remove the trim panel underneath and around the steering wheel, the kick panels, and possibly the door panels. The electrical components of the aftermarket alarm system will be incorporated into the ignition harness, at the dash, or inside the kick panel, so finding close locations for all parts of the alarm system to be mounted in the name of the game.

The idea is to make your alarm system install look like it is part of the vehicle's stock appearance. Any sign of alarm installation will make it easier for an experienced car thief to disable the system upon entering. Use the video above to help you get a good idea of how you should install and fasten all of the wiring and other electrical components into the wiring harness. Removing the negative battery terminal is always a good idea when doing most electrical work on a vehicle--that is unless you're testing wires.

There are a few different ways you can join wires together. The recommended technique for luxury vehicles is either by using a soldering gun and heat tubing, or a crush connector. Buy an electrical repair kit from your local auto parts store for good parts like crush connectors and shrink tubing that will help you do a professional job.

Check out the video above for a good example of joining two electrical wires together. And let's face it, installing a car alarm isn't exactly the most simple installation. If you are doubting yourself, you may want to give your local auto shop a call, and ask for an estimate on getting your alarm system professionally installed.

Don't start replacing the trim panels quite yet! Once you have all of the alarm features installed and are feeling confident, it's time to test out the system.

The best way to do this is by going by the user's manual of the alarm system itself. Follow the instructions, and go through all the functions of the system to make sure you have performed the job properly.

After you have gone through all of the functions and confirmed the proper function, you can then start installing the panels and cleaning everything up. There you have it! Your old vintage vehicle or stock option vehicle is now secured from evil people looking to bust into your life's possessions.

One last thought: if you leave valuable possessions in a clear view inside your vehicle, it doesn't matter how good your alarm system is; thieves will still bash your windows, grab your possessions, and be gone by the time anyone notices the alarm.

Be cautious when traveling! It's going to work out just fine regardless of which panorama you make for your car alarm system installation. It depends on the car. You can take your car to the dealer and they can reprogram the key for you. It will cost a bit of money, but it would be the best thing to do if you want it done correctly. Not Helpful 0 Helpful 1. Likely the wire is shorted. Verify if there are shorted wires: use a multimeter. Reconnect the wires if you're confident or have the mechanic fix it.

Theoretically you can wire it to any 12v power source, such as a secondary battery. Not Helpful 1 Helpful 1. Include your email address to get a message when this question is answered. You will want to test your alarm system after installation. Helpful 0 Not Helpful 0. Make sure you are using the right tools for installation.

This can speed the process up significantly. You Might Also Like How to. How to. More References 1. About This Article. Co-authored by:. Co-authors: 9. Updated: August 4, Categories: Car Electronics. Thanks to all authors for creating a page that has been read , times. Did this article help you? Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Featured Articles How to. Trending Articles How to. New Pages How to. Watch Articles How to.

By signing up you are agreeing to receive emails according to our privacy policy. Follow Us. Most new automobiles come equipped with a sensor trigger. This is the most basic type of automobile alarm, which will sound a siren if the sensors are tripped, such as when the door or windows are opened.

Security systems are not available in older vehicles. A simple alarm, on the other hand, may be setup for a nominal one-time price. The alarm can be accessed from the driver's seat via a button or switch on the dashboard. When this is done, the light next to it will turn on. To cancel the alarm, you need to do two things: first, shut off the vehicle's ignition key; then press and hold the alarm release button for at least five seconds.

Once these steps are taken, the siren will stop and the red alarm light will go out. Some newer cars also have alarm systems that can be accessed from outside the vehicle using a fob or key card. This allows you to arm or disarm the alarm from some distance away, which can be useful if you are parked in a crowded area and don't want everyone pushing their buttons.

Finally, some luxury models have keyless entry systems where you can open the doors by simply tapping your remote on the door handle. But note that unless the vehicle is locked up with the keys inside, someone could still break into your car with just a little bit of physical effort! A perimeter alarm system focuses on all of your vehicle's accessible locations, such as doors, trunks, and so on.

If any of the points are unlocked when exiting the automobile, the system activates the alarm. There are various distinct alarm modes for different parts of the automobile that may be found in different autos.

For example, some vehicles will have a door alarm, while others may have a trunk alarm. Some models also include a firewall alarm, which goes off if someone tries to break into the vehicle through one of its openings. These alarms were originally used by security companies to make their cars look more intimidating to would-be thieves.

Now they are available as options for consumers who want additional theft protection.